Home > Hard Drive > Computer Restarting When Slave Drive Is Installed.

Computer Restarting When Slave Drive Is Installed.

Contents

If you did use a controller card, it will pop up a screen showing the name of the card and any drives it has detected. When a drive does fail, you can still boot the machine and use it normally, but at a slower pace as the drives are trying to find the bytes of data. Reply Tyler Thompson says: September 10, 2007 at 2:10 pm David, When you clone a drive, it copies it exactly as it were before. The ribbon cable is usually quite easy to remove. http://howtoblog.org/hard-drive/xp-security-and-slave-drive.html

Also contributing to this is that I recently bought a new graphics cards. if one fails you must replace it with a drive that matches specifications. Flag as duplicate Thanks! Thank you Mr. http://www.sevenforums.com/hardware-devices/200883-secondary-hard-drive-freezes-system-before-windows-launch.html

Windows Won't Boot With Second Hard Drive

Thanks, Duane Reply Andypandy says: April 4, 2008 at 6:28 pm Thanks for this great info, it made my job soooo much easier. A 320GB drive, for instance, formats to about 300GB. Report Lotus- Jun 27, 2010 at 06:10 PM Glad I kept reading until I saw your fix. Tried safe mode it worked fine 2 or 3 times.

  • My old SAMSUNG Seagates have been working splendidly for some years now with no extra hustle.
  • I don't know how much time it works correctly ?
  • I checked with a few software guys and one recommended turning the computer on and letting it warm up for a half hour even with the drive failure error.
  • Reply hitchface says: November 16, 2007 at 1:47 pm If you post what the BSODs say, like the stop codes, we'll be able to help you more.
  • Here's how to install a new internal drive as extra storage or as a new boot drive.
  • The IDE ribbon comes off of optical drive.

xD haha. Please check out our community forum for help with your question. Chaz Reply Tyler Thompson says: November 1, 2007 at 11:09 pm Chaz, please register on our forums for more specialized help. Hard Disk Not Detected I don't see where I would plug a usb into my old maxtor internal HD.

Any advice? You Want To Install An Ssd Drive In Your Desktop Computer But The Drive Is Far Too Narrow To Fit Also, sometimes my keyboard does not get power supply and I hence cannot get inside Bios settings.Kindly reply ASAP, anyone who might have an idea. Reply Kramium says: June 28, 2008 at 10:14 pm G'day David Risley, Great help from your website! Very helpful!!

be sure the sata wires are in order, there are sata ports on the MB which are numbered , be sure to put port #1 for the OS drive then it Hard Drive Recovery Reply mark says: December 18, 2008 at 12:29 pm working on a computer with two hard drives. Tip: An older PC might "see" just 137GB or less of your new drive, if it's 150GB or larger, due to limitations of its BIOS or OS version. you can have more than 3 drives in a RAID 5 array, and the more drives, mean the more drives can be lost and still have a successful boot.

You Want To Install An Ssd Drive In Your Desktop Computer But The Drive Is Far Too Narrow To Fit

Users make improper or incorrect BIOS settings. 4. Go Here Windows will identify any sectors that have gone bad. Windows Won't Boot With Second Hard Drive Thanks, matey! Pata Hard Drives Are Older And Slower Than Sata Hard Drives Partition and format the disk to your liking, but make sure not to convert it to a dynamic disk, as doing so will provide plenty of annoyances down the road.

If you're installing a SATA drive as secondary storage, follow the data cable from your current drive (assuming it's SATA, too) to the other end. weblink Boot your system up, you should be able to then go to my computer, and see your old hard drive. It goes without saying, their services are pricey, no matter what company you go with. can i still format the new drive and then install my photo editing tools on it , without any problems? How To Install A Second Hard Drive

andyscreationsJun 14, 2014, 8:14 PM I had the same problem and found the SOLUTION.... Max diff for +12V between idle and load is 0.3V.Added HWMonitor: http://www.cpuid.com/softwares/hwmonitor.html artart00Apr 30, 2013, 3:41 PM Hello again,Yes the 360W and the 135W are for 12V1/12V2 and 3.3V/5V combined (respectively), Is there anyway to solve this problem? http://howtoblog.org/hard-drive/boot-up-slowdown-with-slave-hdd.html Therefore, the people who don't know DO need a guide, but this guide is USELESS to them because THEY WON'T UNDERSTAND IT.

Once I found you I was just a few minutes from nirvana! Reboot And Select Proper Boot Device It does the same with all three settings. My System Specs System Manufacturer/Model Number Custom built OS Windows 7 Ultimate 64 bit CPU AMD Phenom II X4 965 Black Edition Motherboard Gigabyte GA-MA790X-DS4 Memory GSkill 4 X 2 GB

It worked for me.

however, if you're one that does not understand any of this info, or part of this awesome info…then go google it elsewhere…speaking of google…great tool to "look-up" info about this you As you can see it works fine. So my question to the world is can I put the harddrive into another computor to restore lost files and possibally benifit from 1 computor - 2 hard drives. Chkdsk HP Laptop Windows 7 keeps restarting after login solved Windows 7 Keeps Restarting after putting in new hard drive solved windows 7 keeps restarting after I hit shutdown Windows 7 keeps

But then it just freezes up. I use my 2TB for movies etc. Solution 1. his comment is here Both Samsung and Seagate are useless as supporters of their products as it is impossible to contact them for assistance.

However, I really don't understand why, because the power supply in the computer (bought in 2010) is rated at 500W/450W (peak/max) and this second HDD is the only extra component I've Thank you in advance, John Reply Vince says: April 27, 2009 at 11:13 pm John Your problem is not a hardware fail. For more information, please see Power Data Recovery Boot Disk. If so, earmark that lead for your new drive.

This should at least get you started. Thanks to all the people that helped! IDE drives are simpler: They always use Molex connectors. These are what we are going to talk in this post.

I just installed a 1TB HD via sata controller card, to my Dell pc. The physical installation is actually pretty easy. Your drive already has been seen by the computer and your just putting it inside. Physical Installation Now's when you actually take off the case and get your hands dirty.

Go Help Me Decide: Which Type of Laptop Do I Need? Chances are that you don't need to worry about this. Do you think its the mobo? Once the physical connections have been verified, it's good to see if the computer can even see the drive at all.

One is used by my system hard drive (the drive that came with my computer), and the other is used by my SATA CD/DVD drive. hello!!! I have a store-brand 500W PSU so by reading the thread I suspected this as the root of the problem. If you're unsure which drive type your PC already has, check its documentation or label.