Home > How To > INeed Help Clearing RAID Config To Allow Use Of Individual Drives.

INeed Help Clearing RAID Config To Allow Use Of Individual Drives.


RAID Controllers If you do decide that RAID makes sense for you, make sure you use a quality RAID controller. So all your help and guildance has helped me a heck of a lot. The Port Multiplier is the function of the SATA Host Controller. I believe that the statistically correct way of looking at it is to multiply the odds of a drive not failing with itself as many times as you have drives, to Source

Put windows cd in, boot to cd, if xp you may need the motherboard cd to install sata drivers during load (usually f6)5. Set "storage/drives" to raid in bios, 3. Used a free recovery utility and only found the modified version of the file (filled with ‘X's). June 3, 2012 Carl Beside the point. http://www.techsupportforum.com/forums/f217/ineed-help-clearing-raid-config-to-allow-use-of-individual-drives-1141210.html

How To Setup Raid 0

It's all about what you want - if you want speed and don't care about data integrity, and there are some desktop and workstation situations where this can be true - Published 06/3/12 SHOW ARCHIVED READER COMMENTS (126) Comments (126) June 3, 2012 RRRoman Good article, thanks. No, you do not.

June 6, 2012 spike @Storm: If you have any way to prove that, with a bit more detail on specific conditions, I would be interested to see it. That is why you have received advice above to use the 500 GB as a stand-alone unit for backups AND make sure those backups are frequent - even up to every Anything else, sir?" "Um yes, where do keep the AR-15 rounds and those things you bury and when you step on them they explode?" "Landmines?" "Landmines, landmines! How To Setup Raid Windows 10 Still a no go.

The list you did before shoed the regular disks. How To Setup Raid 0 Windows 10 June 3, 2012 Carl I use DBAN, it has 3 wipes. Hey Chris I caught you on Tech TV (Cool Show-Loved It)…You amase me, I've been Geeking with the whole specturm of PC's/Laptops/Netbooks/Now Tablets and of coarse Macs. http://www.pcworld.com/article/132877/RAID.html Thanks again.

Amazing. Windows 7 Raid 1 How do you do it? One of the disk identifier entries may show the overall RAID set that was configured on the drives. Just because a drive has a 1.72% chance of failure doesn't mean with 2 drives you have a 3.44% chance of having a drive failure.

How To Setup Raid 0 Windows 10

The TX2200 I moved to my wife's box, with a pair of WD100 0JBs, has been operating for *four years* without a failure of any kind.) OK, these are dedicated, hardware, Go Here The original paper ends with the conclusion that: “Data overwritten once or twice may be recovered by subtracting what is expected to be read from a storage location from what is How To Setup Raid 0 btw smashing a HDD will not destroy data, it CAN still be recovered. How To Setup Raid 1 Windows 10 Here is the link to the manual.

I wonder if the BIOS will not support a RAID array with a solid state drive(?). http://howtoblog.org/how-to/help-with-getting-software-to-recognize-my-drives-when-installing-xp-internet-error.html If you can only see one drive, your system eSATA port does not have Port Multiplier function. It is ONE article we are talking about. What is the maximum capacity of the drives that I can use with the HX4R? Windows 10 Raid

Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic RAID10 requires 4 drives. However the reason I'm using Raid 5 is because I already purchased 2 new SATA HDD, and 1 in which my brother gave it to me (Seagate 500GB), so I was have a peek here Filled it with the letter ‘X'.

Set the DIP switches to desired RAID mode of operation Connect to power to the HX4R Connect USB3/USB2 to HX4R and PC/Mac Go into Disk Management in Windows Windows 7 Raid 0 The attack remains theoretical and confined to older hard disk technology. If you ran this across a raid configuration that breaks up the data, all the better since that data will be extremely difficult to recover, especially those who are experts in

RAID systems can do a lot of useful stuff to make life easier, but they also are more complex and hence require more thought and attention than a plain hard drive.

A lot of the documentation may have a bias to it as well, as at the end of the day the engineer responsible there will be taking a lot of his Can I change them to pass through mode now (from the RAID0 config they are currently in) without compromising the data that is already on them? 2. I already have the OS installed and now i'm setting up the Raid. Windows 7 Raid 5 I have an old Dell that's been running continuously for 15 years still on NT4 SP1.

I added two additional drives to the server and was attempting re-install CentOS. After writing to LaCie, I found out that "Disk Utility" is not capable of this de-construction (it can create Arrays but not break them apart). The same thing with @Keith who claims to have figured all of this out and rendered those erasure methods useless. "I have recovery software designed to extract over written disks." Sounds http://howtoblog.org/how-to/i-m-sure-i-ve-deleted-malware-but-it-s-stuffed-with-my-drives.html Sorry!

Needless to say, yes indeed, for what ever reason still un-beknownst to this day, 2 drives failed at once. Therefore, video editing alone does not mean RAID0 will be useful...it has to be video editing in which your CPU or memory is not the bottleneck, which honestly is very uncommon. I was able to erase the disks. Power down the HX4R, remove bad hard drive, put in a new drive (similar or bigger in capacity), and turn it back on and let the rebuild take place.

But then you have to ask yourself whether it's work the money? I currently do not have a USB 3.0 port; can I use a USB 2.0 port for my HX4R? Not only do I purchase, supply & maintain new workstations, notebooks & server equipment (servers, sans, backups, etc…) , I also recycle & destroy the info on old ones. Is it theoretically possible to recover overwritten data?

Closed it. If you do not wish to wait, then you can usually interrupt this process (Control + C will abort this) after a minute or two. Yes, you are right because after configuring the mode the two drives are combined into one and your computer system will see it as one drive, therefore you do not need According to your numbers you've sold 290 of those drives and yet the chance of failure for each drive you've sold is but 1.72%--which means that your company has seen ~5

The expensive hardware and brains on those raid controllers is for the overhead associated with calculating and distributing parity across all of the drives. A lot of "forensic experts" in on this discussion, which is usually the case and makes it easy to weed out these internet forensic experts from the actual experts. and to strong and it will render the hdd completely dead. Likewise, if the 300Gb drive you buy to use as an IDE drive has a MTBF-hour rating of 50,000 hours, but each of the 150Gb drives you use in your RAID

It is not true RAID, it is like a form of disk spanning to simply show all your drives as 1. He decided it worths him enough to pay 2-3 months of salary to get it back. And they can do much more… A friend of mine had some important stuff on a HDD that catched fire. Sure know what you're getting into, but dabbling in this sort of thing, asking these questions, and working through these issues to find what's right is a great way for people

If you get a nasty virus for example, or delete a file by mistake, RAID users are usually no better off than regular computer users. I was down for a week before the new drive got to me and I got it set up again.