If I wanted an MBR again, I needed to re-install Win 7 as well (or repair it) because the XP installation will screw up the 7. Then you have to pick which drive to boot from in the BIOS.The reason is the MBR. Choose MBR if it's smaller than 2 TB. When it comes to choosing a partition, make sure you select the one you created using the steps above. Source
Most modern BIOSes will let you call up a boot menu by pressing some key combination after powering up or resetting, and allow you to boot from any installed hard drive, When you get to this point, select the partition (step 2) or hard drive to install Windows 7 on. (See screenshot below) 6. I followed through the steps quite okay, however just before creating a new partition as illustrated I got a message " The operation you selected will convert the selected physical disk(s) If you install the oldest OS first, it's a much easier affair. http://www.howtogeek.com/howto/8790/dual-boot-your-pre-installed-windows-7-computer-with-xp/
Use the partition manager to shrink the partition with Windows Vista/7 to make enough room at the end of the drive for Windows XP. issue resolved."New Problem"I have 3 partitions c:70GB d:80gb e:82gb and 100mb system reserved as primary partitionsI have shirnk c: to 50 gb to have 20 gb (logical partition)for Windows xp.After installing BatlanOct 1, 2013, 12:15 PM I have a similar situation but with some differences.
See How to Change Drive Letters in Windows for help doing that. Choose Do not format this volume on the Format Partition step and then tap or click Next >Note: If you Download XP, Vista and Win7 drivers if possible. then five dots came up and the whole procedure locked up and would not respond to any key or even control, alt, delete. How To Install Windows Xp Over Windows 7 At the same time, we need to pay attention to that installing operating system is not like installing third-party software.
It saved me a few hours of setup at least and brought over settings that I'd have had to recreate. Windows Xp Dual Boot Windows 10 it just boots directly into windows 7. Why on earth, after the Vista debacle, would MS want to make it more difficult to get XP users to upgrade? http://www.sevenforums.com/tutorials/8057-dual-boot-installation-windows-7-xp.html Performing an operating system upgrade replaces your old Windows operating system (“e.g.” Windows XP) with a new one such as Windows 7 or Windows Vista.
Just wish this was made sooner, the one that I used wasn't as clear as yours. Dual Boot Windows 7 And Xp Same Partition Once complete, you will then be taken to the Windows 7 or Windows 10 installation process. I then used the EasyBCD 2.0 software and got the dual boot I wanted.Then it worked. After the boot up on my installation i got a blue screen regarding on Hardware compatibility on XP.
solved Windows 7 x64 / XP Pro x86 Dual Boot With 3TB Drives solved Windows 7 & 8 Dual boot on seprate hard drives, how do you do it? https://neosmart.net/wiki/easybcd/dual-boot/windows-xp/installing-second/ If you have a SATA drive, then you will need to do either one of these options to load the SATA drivers for XP.How to Slipstream SATA drivers into Windows XP How To Install Windows 7 And Xp On The Same Computer Reply 1fastbullet November 21, 2009 at 12:04 am I think you jumped a step. Dual Boot Windows 7 And Xp Separate Hard Drives These five points need our attention when we install the two operating systems.
As I said this tutorial rox! this contact form Social Networking Integration. I don't mean to be nit-picky, but I was just curious how you ended that thought.http://yanigisawa.myopenid.com/Tuesday, 04 August 2009 02:30:33 UTCBack when Vista was released we got a box of Vista So in re-installing XP, I disconnected the SATA Win 7, treated the installation independently and isolated the other HD. How To Dual Boot Windows Xp And Windows 7 (xp Installed First)
Technical information: *** STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000) --------------------------------------------------------------------------------------------------- Please help me… I really need to get this thing dual boot ASAP. Done and working.2. I wrote a request here http://www.techsupportforum.com/hardware-support/driver-support/517300-dual-boot-xp-pro-windows-7-home-premium.html a couple of days ago. http://howtoblog.org/windows-7/windows-restarting-partition-corrupt.html What is the difference between an upgrade installation and a dual boot Win7 installation?
what should i do now to run easy bcd June 10, 2010 jim After a while of trying to install Win7 first with no progress i decided to install XP first Dual Boot Windows 7 And Xp Usb Drive Go to your Windows 7: Start / Control Panel / System and Security / Backup and Restore / Create A System Repair Disk. Do I have to have professional????
creating the partition was easy enough, but once i tried to install xp pro on the new partition it loaded drivers and said it was rebooting. Windows 7 is higher so we should install Windows XP and then Windows 7. March 20, 2010 Réplika I still use xp, on my pc, microsoft doesn't support sp1 anymore so I think to use windows 7 now, but ı will have to change my Dual Boot Windows 7 And Xp Easybcd Kinda sucks when most machines don't come with floppies anymore.
I have 7 installed and want to also have a dual boot capability for XP (as many of my old programs wont run on 64bit) I set up the partition and But... Thanks Mark December 18, 2010 Giulio Hey everything worked fine for me, I can dual boot but I only have 1 problem on xp how to set up wifi? Check This Out Windows XP and Windows 7 should be installed to different partitions because different operating systems may disturb each other if they are in the same partition.
Granted, I did install 32bit Win7. Installing Windows 7 Next, I actually installed Windows 7. e.g. Read More .
I over simplified explaination. If the partition you created was already formatted as NTFS you can leave it, or you can choose the FAT file system if you want. If you install the oldest OS first, it's a much easier affair. I have XP Pro, Vista Ultimate and W7RC32 and they are all managed by the OS.
In the "Drivers" step, copy them to a USB drive. After booting into one of those but when trying to do something like logging in or running an important program? I need to be able to share and receive a signal from the printer's of PC MASTER, that is, the microcomputer where the printer is installed. E-mail: [email protected] May 4, 2010 Larry tryed the above method went well till install xp.
Is this a function of the XP cd or is it a thing with the laptop. Basically you continue through as if you were doing a clean install on any hard drive. The settings EasyBCD chooses may look wrong, but it's complicated.EasyBCD adding WinXP entry Now reboot. Forgive me if you already know this, but there is one (or no) Master Boot Record on a given hard drive.
An unpartitioned drive will not show up in the drive list at the top of the window.Note: If the hard drive is new, it will probably be on a dedicated row Ask ! Really appreciate it. Like I said, I'm not that good.
my original XP drive was plugged into SATA 1 and the Win 7 drive was on SATA 2. After the boot up on my installation i got a blue screen regarding on Hardware compatibility on XP. This brings up a list of drives to boot from, ie HDD1, HDD2, SSD, DVD what ever, you select and computer boots to that drive - This DOES NOT change boot Windows Easy Transfer Here's the Windows XP machine running Windows Easy Transfer.